Cleated Belt Product Inquiry Ask your question below Name* First Last CompanyEmail* Phone*Belt Application*A brief description of what is to be conveyed.Preferred Belt MaterialSelect belt material or leave blank if no preference or other material is required. RubberPVCUrethaneBelt Length (feet)*Enter the total loop length of the belt in feet.Belt Length (inches)Enter the total loop length of the belt in inches.Belt Width (inches)*Enter the total loop length of the belt in inches.Belt Support*Select whether the belt will be supported by rollers or a slider bed.RollersSlider BedPulley Diameter(s)Enter one diameter if all pulleys are the same dimension. Enter multiple values if different size pulleys are required.Belt Finish*Select belt end finishing. See technical resources for a description of splicing and fastening options.Hot EndlessMetal LacedOpen EndsCleat Type*Select the cleat style. The straight cleat is most common.Straight CleatAngled CleatCleat Height (inches)Enter the cleat height in inches.Cleat to Cleat Distance (inches)Enter the center to center distance between cleats.Cleat Indent (inches)Enter the distance from the edge of the belt to cleat in inches. Leave blank if none.SidewallSelect the type of sidewall required or select 'No Sidewall Required'.Standard SidewallMini SidewallNo Sidewall RequiredSidewall Height (inches)If a sidewall type was selected, enter the height in inches.Sidewall Indent (inches)If a sidewall type was selected, enter the distance from the edge of the belt to the sidewall in inches.Freight RateProvide your ship to address for a freight rate:CommentsEnter any special requirements or comments that would affect the conveyor belt design.